HP — Using PowerSave

Using PowerSave The adjustable PowerSave Time feature reduces power consumption when the printer has been inactive for an extended period. You can set the length of time before the printer goes into PowerSave mode to 1 MINUTE , 15 MINUTES , 30 MINUTES , or to 1 HOUR , 2 HOURS , or 4 HOURS . The default setting is 30 MINUTES . Note The printer display dims when the printer is in PowerSave mode. PowerSave mode does not affect printer warm-up time. To set PowerSave Time 1 Press to enter the MENUS . 2 Press to highlight CONFIGURE DEVICE . 3 Press to select CONFIGURE DEVICE . 4 Press to highlight SYSTEM SETUP . 5 Press to select SYSTEM SETUP . 6 Press to highlight POWERSAVE TIME .

7 Press to select POWERSAVE TIME . 8 Press or to select the appropriate time period. 9 Press to set the time period. 10 Press P AUSE /R ESUME . To disable/enable PowerSave 1 Press to enter the MENUS . 2 Press to highlight CONFIGURE DEVICE . 3 Press to select CONFIGURE DEVICE . 4 Press to highlight RESETS . 5 Press to select RESETS . 6 Press to highlight POWERSAVE . 7 Press to select POWERSAVE . 8 Press or to select ON or OFF . 9 Press to set the selection. 10 Press P AUSE /R ESUME . 60 Installation C9660-90901