Connecting to a computer The HP Color LaserJet 4600 printer supports network and parallel connections at the same time. Parallel connections A parallel connection is made by connecting the printer to the computer using a bidirectional parallel cable (IEEE-1284 compliant) with a c-connector plugged into the printer’s parallel port. The cable can be a maximum of 10 meters (30 feet) long. When used to describe a parallel interface, the term bidirectional indicates that the printer is able to both receive data from the computer and send data to the computer through the parallel port.
Figure 3-3 Parallel port connection Note To use the enhanced capabilities of the bidirectional parallel interface, ensure that the most recent printer driver is installed. These enhanced capabilities include bidirectional communication between the computer and printer, faster transfer of data, and automatic configuration of printer drivers. Note Factory settings support automatic switching between the parallel port and one or more network connections on the printer. C9660-90901 Chapter 3 Installation and configuration 61