7 Tighten the blue thumb screws. 8 Close the top cover, and turn the printer on. After a short while, the control panel should display NEW FUSER KIT= . 9 Press to highlight YES . 10 Press to reset the fuser count. Replacing the fuser when it is not at end of life If you replace the fuser when it is not at the end of its life, for instance if it is defective, you will need to reset the fuser count through the control panel. To reset the fuser count, do the following: 1 Press to enter the MENUS . 2 Press to highlight CONFIGURE DEVICE . 3 Press to select CONFIGURE DEVICE . 4 Press to highlight RESETS . 5 Press to select RESETS . 6 Press to highlight RESET SUPPLIES .
7 Press to select RESET SUPPLIES . 9 Press to select NEW FUSER KIT . 8 Press to highlight NEW FUSER KIT . 10 Press to highlight YES . 11 Press to reset the fuser count. C9660-90901 Chapter 4 Printer maintenance 83