HP — Replacing the fuser

Replacing the fuser Replace the fuser when the printer control panel displays REPLACE FUSER KIT . 1 Turn the printer off. 2 Using the side handles, open the top cover. WARNING! The fuser might be hot. Wait 10 minutes before proceeding. 3 Completely loosen the blue thumb screws on either side of the fuser. 4 Grasp the ends and pull straight up to remove the fuser. 5 Remove the new fuser from the bag. Place the used fuser in the bag for recycling. See the enclosed recycling guide for recycling instructions. 6 Grasp the sides of the fuser and push down firmly into the printer.

DOWN WITH THIS LEVER DOWN WITH THIS LEVER DOWN WITH THIS LEVER DOWN WITH THIS LEVER 82 Replacing supply items C9660-90901