DC controller circuit The DC controller is responsible for controlling the print operation sequence for the printer. The sequence of events is as follows: 1 Power is turned on. 2 The low-voltage power supply unit supplies DC power to the DC controller. 3 The CPU in the DC controller starts to control printer operations. 4 The printer enters the standby state. 5 Based on the print command and the image data input from the formatter, the CPU sends a signal to drive the laser diode, the motors, and the solenoids. Note See the general circuit diagram on page 307 for detailed information on the printer circuitry. Figure 5-3 DC controller circuit C9660-90901 Chapter 5 Theory of operation 93