Motors and fans The printer has ten motors and two fans. Eight of the motors are DC motors; the other two are stepping motors. Figure 5-4 shows the locations of the motors and fans. Table 5-2 explains the function of each component. One of the stepping motors and six of the eight DC motors are used for paper feeding and image formation. The remaining stepping motor is the developing disengaging motor. The remaining two DC motors are fan motors. Since the printer transfers an image in four colors in line onto the paper, small changes in the rotational speed of the motor are likely to cause color misalignment.
The DC motors used for image formation are precisely controlled to account for rotational speed fluctuation. Figure 5-4 Motors and fans 94 Engine control system C9660-90901