Siemens — Siemens BETA Low-Voltage Circuit Protection Manual

© Siemens AG 2010 BETA Measuring Three-Phase Measuring Devices 7KT1 39 LAN couplers Data transmission from LAN coupler to PC Simultaneous display of measured data on more than one PC This data transmission is PC-controlled. A software tool runs in the background on the PC and uses the network to cyclically re- trieve any measured data from all available LAN couplers and save it to the hard disk. The software supplied with the LAN coupler supports display of measured data on any number of PCs connected to the network over a client-server architecture. A PC acts as the server, similar to an Intranet or Internet server.

This PC runs the software components that retrieve the measure- ment data from the LAN coupler and save it to hard disk. The MS Excel macro can be used to visualize the measured data on both the server PC and the clients. Software tool The supplied software tool has the following functions: Background transmission of measurement data from multi- counters and E-counters and a number of LAN couplers Full display of device measured data through a macro based on MS Excel Adjustable limit value signals for measured quantities Violations of limit values are signaled with time stamp. Other client PCs can access the data pool of the server PC to vi- sualize the measured data.

Open software architecture You will find further information on Modbus operation on the In- ternet at: www.siemens.com/beta The architecture of the software tool is open and can be custom- ized to suit user requirements. The MS Excel macros are freely accessible and can also be customized by the user. Display of measured data on the PC A Visual Basic macro for MS Excel is supplied with the LAN cou- pler for the display of measured data on a PC. Among other things, this software tool lets you display all 35 measured data of a 7KT1 34 multicounter on a single panel. You can then select the various measuring devices you want to display from a small list box.

The software also lets you set alarm limits for up to 10 measured quantities of a multicounter. RS485 TCP/IP network LAN coupler If a measured value exceeds or falls below the specified limits, the relevant indication is output, complete with time stamp from the PC clock. Measuring device 1 PC Clients - Communication software - MS EXCEL visualization - Configuration tool (only required for configuration of the LAN coupler) Measuring device 2 LAN coupler LAN coupler Measuring device 10 I201_13445 Block diagram of a system Display of measured data of a multicounter 19 19/138 Siemens LV 1 · 2010