© Siemens AG 2010 BETA Protecting Low-Voltage Fuse Systems 3NX1 LV HRC signal detectors 3NH LV HRC fuse bases 3NX1 LV HRC signal detectors For more information on fuse monitors, please refer to Chapter "Monitoring of electrical values" in Catalog ET B1. Overview 3NH LV HRC fuse bases Terminals for all applications Terminals are as different as the requirements of individual sys- tems. Flat terminals with screws are suitable for connecting busbars or cable lugs. They have a torsion-proof screw connection with shim, spring washer and nut. When tightening the nut, always ensure compliance with the specified torque due to the consid- erable leverage effect.
The double busbar terminal differs from the flat terminal in that it supports connection of two busbars, one on the top and one at the bottom of the flat terminal. The modern box terminal ensures efficient and reliable connec- tion to the conductors. They support connection of conductors with or without end sleeves. In the case of flat terminals with nuts, connection of the nut to the terminal lug is torsion-proof. When tightening the nut, the torque must be observed because of the considerable leverage effect. Up to three conductors can be clamped to the terminal strip. 19 19/95 Siemens LV 1 · 2010 * You can order this quantity or a multiple thereof. Ue In Uc MW DT V AC A V Order No.
Price per PU PU PS* PG Weight per PU approx. Unit(s) Unit(s) kg Weight per PU approx. Fuse monitors For all low-voltage fuse systems. Can be used in asymmetric systems afflicted with harmonics and regenerative feedback motors. Signal also for disconnected loads. 230 4 3 AC 380 ... 415 2 } 1 1 027 0.150 5TT3 170