LVS-7500 External System Installation and Quick Start Guide 1280 x 1024 Screen Resolution Windows® 7 Professional or Windows® 8.1 Professional Two available USB 2.0 ports (required for the Read Head and Stop Motion Unit/Light Tower Unit) IMPORTANT: A desktop or laptop computer may be used as long as the computer meets the aforementioned requirements. Stop Motion Printer Interface Requirements If interfacing the LVS-7500 External System to a printer for stop motion, the user is responsible for ensuring the printer and printer supplier meet the following requirements:
The printer is capable of stopping from an external signal supplied by the LVS-7500 External System; not all printers are capable of performing this function. The printer supplier can assist the user with interface cards, connectors and printer settings needed to accept the external signal from the LVS-7500 External System. Omron Microscan supplies an unterminated 5V cable (active high, active low) as the only connection to the printer. The printer must be completely setup and functional, including all interface and printer settings, prior to installing the LVS-7500 External System. LVS-7500 External System Installation and Quick Start Guide Page 6 of 45