STARTING AND DRIVING Caution! Warning! ■ Keep the area of the rear radar clean. If the rear radar is blocked, some driver assistance systems may not work properly. ■ The warning message pops up in the instrument cluster when there is dirt or snow around the rear radar. After cleaning up the dirt or snow, if the warning message in the instrument cluster does not disappear, stop the vehicle at a safe place and contact a Lynk & Co Center. ■ Service and replacement on the rear radar/rear bumper should only be carried out by a trained and qualified Lynk & Co service technician. VESPER ■ ESP is a supplementary aid and cannot deal with all situations or road conditions.
You are always responsible for driving safely and complying with current laws and traffic regulations. ■ Do not modify the vehicle ’ s suspension. The EPS may not operate properly and the vehicle's handling performance could be adversely affected. This could result in an accident and/or personal injury. Enable/disable Electronic Stability Program (ESP) Electronic Stability Program (ESP) EPS helps you to stabilize the vehicle in oversteer and understeer situations. When oversteer or understeer is detected, the system will apply braking on one or more wheels to improve your control of the vehicle stability. You can enable/disable ESP via the ESP OFF button on the front tunnel console.
Press and hold to disable ESP, press and release to re-enable ESP. The ESP has a number of subsystems: ■ Anti-lock Brake System (ABS) ■ Electronic Brake Force Distribution (EBD) ■ Brake Assist System (BAS) ■ Traction Control System (TCS) ■ Hill Start Assist (HSA) ■ Hill Decent Control (HDC)(if equipped) ■ Ready Alert Brake (RAB) ESP OFF button 179