Manual - BMV-712 Smart 3. Installation 3.1. What's in the box? 3.2. Mounting the shunt The shunt has an IP21 rating; this means that the shunt is not waterproof and has to be mounted in a dry location. The shunt has two 5.5 mm holes for mounting purposes; these are located in the base of the shunt. The holes can be used to screw or bolt the shunt onto a hard surface (note that these screws are not included). Page 4 Installation BMV-712 Smart head unit together with attachment sleeve. 500A shunt. Two 1.5m (59") red cables with a 1A fuse. 10m (33ft) RJ12 UTP cable. Square face plate together with an attachment flange. Bag with 4 small screws. Quick installation guide.
Spare serial number sticker.