en Shredding attachment The following example describes use of the base attachment as a meat mincer: Preparation W W Warning Risk of injury! Do not reach into the sharp blades and edges of the shredding, grating and slicing inserts. W W Warning Risk of injury! – – Do not reach into the feed chute with your hands. – – Only use the pusher when adding more food. X Sequence of figures H 1. Open the cap. Fit the required insert into Caution! the housing. 2. Close the cap until you hear it click into – – Do not process bones, gristle, sinews or other solid components. – – Do not process frozen meat. – – Do not apply great force with the pusher. position.
The shredding attachment is now prepared. X Sequence of figures G 1. Fit the prepared attachment onto the drive Use of the base unit, holding it at an angle. 2. Turn the attachment anticlockwise until W W Warning Risk of injury! you hear it click into position. 3. Fit the filling tray and insert the pusher – – Do not reach into the feed chute with your hands. – – Only use the pusher when adding more food. in the feed chute. 4. Prepare your food. Chop up large parts beforehand so they fit into the feed chute without having to press them in. 5. Place a suitable container under the Caution! – – The pusher can only be inserted in one direction. – – Remove hard shells (e.g. on nuts).
– – Do not apply great force with the pusher. attachment. Add the prepared food to the filling tray. 6. Connect the mains plug. Switch on the X Sequence of figures I 1. Fit the prepared attachment onto the appliance. 7. Use the pusher to slide the food down drive of the base unit, holding it at an angle. 2. Turn the attachment anticlockwise until the feed chute, applying light pressure. 8. Once you have finished, switch off the appliance and pull out the mains plug. 9. Remove the filling tray and pusher. 10. Hold down the release button and turn the you hear it click into position. 3. Fit the filling tray and insert the pusher attachment clockwise until it disengages. 11.
Remove the attachment, take it apart in the feed chute. 4. Prepare your food. Chop up large parts beforehand so they fit into the feed chute without having to press them in. 5. Place a suitable container under the and clean all parts. X “Care and daily cleaning” see page 23 attachment. Add the prepared food to the filling tray. 6. Connect the mains plug. Switch on the Shredding attachment For shredding, grating and slicing items such as cheese, fruit, vegetables, nuts, almonds, dried bread rolls and other hard foodstuffs. Select the appropriate insert depending on the type and consistency of the food to be processed. X “Tips” see page 25 appliance. 7.
Use the pusher to slide the food down the feed chute, applying light pressure. The food is now cut up or shredded. 8. Once you have finished, switch off the appliance and pull out the mains plug. 9. Remove the filling tray and pusher. 22 MFW3_EU_8001019358.indb 22 01.12.2015 12:05:48