HP OmniBook 7100 Troubleshooting and Diagnostics 3-23 Serial Port Sets how the serial port is configured by the BIOS (specified Enabled or automatic). Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4 Infrared Port Sets how the infrared port is configured by the BIOS (specified Disabled or automatic). Mode Sets the hardware to support SIR (Standard IR), ASK IR SIR (amplitude shift keyed IR), or FIR (Fast IR) infrared communications. (Driver installation required.) Base I/O address Sets the I/O address and interrupt. 2F8h, IRQ3 DMA channel For Fast IR mode, sets the DMA channel. DMA3 Front/Back Sets which infrared port is active.
Back Parallel Port Sets how the parallel port is configured by the BIOS (specified Enabled or automatic). Mode Sets the port to normal, bi-directional, EPP, or ECP. ECP Base I/O address Sets the I/O address. 378h Interrupt Sets the interrupt. IRQ7 DMA channel For ECP mode, sets the DMA channel. DMA3 Audio Sets how the audio system is configured by the BIOS Enabled (specified or automatic). SB I/O address Sets the Sound Blaster I/O address. 220h WSS I/O address Sets the Windows Sound System I/O address. 530h AdLib I/O address Sets the AdLib synthesizer I/O address. 388h Interrupt Sets the interrupt. IRQ5 1st DMA channel Sets the DMA channel for playback.
DMA1 2nd DMA channel Sets the DMA channel for recording. DMA0 MPU Device Sets how the MIDI capability (hardware wavetable) is Disabled configured by the BIOS (specified or automatic). MPU I/O address Sets the MIDI I/O address. 330h Interrupt Sets the interrupt. IRQ11 Security Menu Default User Password Is Shows if a user password is set. Clear Administrator Password Is Shows if an administrator password is set. Clear Set User Password Press ENTER to set, change, or clear user password. Password length can be no longer than 8 characters, 0-9, A-Z. Set Administrator Press ENTER to set, change, or clear administrator password. Password This password protects BIOS Setup settings.
Boot Sets whether a user password is required when the computer Enabled boots. Resume If boot security is enabled, sets whether a user password is Enabled required when resuming from a suspended state. Undock If boot security is enabled, sets whether a user password is Disabled required when undocking the OmniBook. Hard Disk Drive Lock If boot security is enabled, sets whether a password is stored Disabled on the hard disk. Secures data on the disk if the disk is moved to another computer. Floppy Boot Sets whether the floppy drive is a boot device.
Enabled Power Menu Default Power Management Mode Disables time-outs, selects a combination of time-outs, or Max Power allows customized time-outs. Savings Smart CPU Mode Enables automatic CPU power savings. Absence of keyboard, Off mouse, and hard disk activity could cause slower CPU response. Standby Time-out Sets the period of inactivity after which the computer goes 2 minutes from On to Standby power mode.