3-24 Troubleshooting and Diagnostics HP OmniBook 7100 Suspend Time-out Sets the period of inactivity after which the computer goes 4 minutes from Standby to Suspend power mode. (Skips Standby mode if that time-out is disabled.) Hibernate Time-out Sets whether the computer goes from Suspend to Hibernate 4 hours power mode after the indicated period of inactivity. (Skips Suspend mode if that time-out is disabled.) Hard Disk Time-out Sets the period of hard disk inactivity after which the hard disk 2 minutes stops spinning. Time-out on AC Sets whether power management time-outs occur while the ac Disabled adapter is connected.
Power Button Mode Sets the action of the blue power button when pressed for less Suspend than 4 seconds. Resume on Modem Ring Sets whether the system resumes from Suspend if a ring Enabled signal is received. Resume on Time of Day Sets whether the system resumes from Suspend at a defined Disabled time of day. Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled. Auto Suspend on Undock Sets whether the OmniBook suspends after undocking. When Lid Closed Boot Menu Default Diskette Drive Shows the order of boot devices. Move the entries to change 1. Diskette drive Hard Drive the order. 2. Hard drive CD-ROM Drive 3.
CD-ROM drive Exit Menu Save Changes and Exit Saves Setup changes, exits, and reboots. Discard Changes and Exit Discards Setup changes since last save, exits, and reboots. Does not affect Security and date/time changes. Get Default Values Restores default settings, stays in Setup. Does not affect Security and date/time settings. Load Previous Values Discards Setup changes since last save, stays in Setup. Does not affect Security and date/time changes. Save Changes Saves Setup changes, and stays in Setup. Security settings are saved when changed.