Introducing the OmniBook Configuring the OmniBook with the BIOS Setup Utility Security Menu Default 1-13 WSS I/O address Sets the Windows Sound System I/O address. 530h AdLib I/O address Sets the AdLib synthesizer I/O address. 388h Interrupt Sets the interrupt. IRQ5 1st DMA channel Sets the DMA channel for playback. DMA1 2nd DMA channel Sets the DMA channel for recording. DMA0 MPU Device (OmniBook 7100 only) Sets how the MIDI capability (hardware wavetable) is configured by the BIOS (specified or automatic). Disabled MPU I/O address Sets the MIDI I/O address. 330h Interrupt Sets the interrupt. IRQ11 User Password Is Shows if a user password is set.
Clear Administrator Password Is Shows if an administrator password is set. Clear Set User Password Press ENTER to set, change, or clear user password. Password length can be no longer than 8 characters, 0-9, A-Z. Set Administrator Password Press ENTER to set, change, or clear administrator password. This password protects BIOS Setup settings. Boot Sets whether a user password is required when the computer boots. Enabled Resume* Sets whether a user password is required when resuming from a suspended state. Enabled Undock* Sets whether a user password is required when undocking the OmniBook.
Disabled Internal Hard Disk Drive Lock* Encodes the current user password (or administrator password if that is the only password set), on the internal hard disk drive. Disabled Floppy Boot Sets whether the floppy drive is a boot device. Enabled * Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is enabled.