use and maintain hp restricted 3-93 restart the printer If the LCD control panel displays the message XX.XXXX SERVICE ERROR, the printer might have a hardware problem. Press and hold (power button) to turn off the printer. Wait a few seconds, and then turn it on again. In most situations, this action solves the problem. If the message persists, your printer might need service. Write down the error code, and then go to hp instant support to learn more about possible causes for the message. See "hp instant support" for more information.
the printer Ready light turns off while the printer is turned on the printer is offline and the LCD control panel displays the message PAUSED Press (pause/resume button) on the printer. The printer resumes printing the current job or returns to the READY state. the printer shuts down unexpectedly check the power Make sure the power cord is connected firmly to the printer and to a working power receptacle, and that the printer is turned on. The Ready light on the LCD control panel should be green. Press and hold (power button) to turn off the printer, and then turn it on again.
nothing is printed be patient Complex documents that contain many fonts, graphics, and color photos take longer to begin printing. The LCD control panel displays the message PROCESSING JOB and the Ready light blinks when the printer is processing information to be printed. check the power Make sure the power cord is connected firmly to the printer and to a working outlet, and that the printer is turned on. The LCD control panel should display some message and the Ready light should be green. Press and hold (power button) to turn off the printer, and then turn it on again. check the interface cable Make sure the interface cable (USB, parallel, or network) is connected properly.
check the print media Make sure media is loaded correctly in the tray and that the print media is not jammed in the printer. try printing a demo page Press (select button) on the LCD control panel. Press (down arrow button) to highlight INFORMATION, and then press (select button). Press (down arrow button) to highlight PRINT DEMO, and then press (select button) to print the Demo page. check the printer setup Make sure the printer is selected as the current or default printer. Also, if your computer is running Windows, make sure that Pause Printing is not selected.
Click Start, point to Settings, and then click Printers (Windows 98, Windows Millennium Edition, Windows NT 4.0, and Windows 2000). -Or- Click Start, and then click Printers and Faxes (Windows XP). Right-click the printer icon you want to check, and then make sure that Pause Printing is not selected.