MIL-STD-100E — MIL-STD-100E Notice 2: Engineering Drawing Practices PDF Download

Downloaded from https://www.everyspec.com MIL-STD-100E NOTICE 2 101.14,20” Abbreviations. Abbreviations shall be in accordance with MIL-STD-12. 101.15 Diagrams. 101.15.1 Electrical and electronics diagrams. Electrical and electronics diagrams and interconnection diagrams shall be in accordancedance with ANSI Y14.15, Y14.15a and Y14.15b. 101.15 .1.1 Logic circuit diagrams. Logic circuit diagrams shall be in accordance with ANSI/IEEE Std 991. I 101.15.2 Printed board drawings. Printed board drawings shall be in accordance with the requirements of MIL–STD–275, MIL-STD–2118, ANSI/IPC-T-50, and ANSI/IPC-D-275 as applicable. 101.15.3 Printed board description in digital form.

When printed board descriptions are in digital form (defined either by metric or customary units) the descriptition and form shall be in accordance with ANSI/IPC-D-350 or MIL-D-28000. 101.16 Media for drawings and associated lists. 101.16.1 Materials. 101.16 .1.1 Plastic sheet or roll. originals on plastic sheet shall be in accordance with I L-P-519, type I or II, class 2. Undimensioned drawings, printed wiriring artwork masters, production masters, and master pattern drawings shall be in accordance with MIL-D-8510. type 11 (per MIL–STD-275) or L–P–519, type I or II, class 1. 101.16 .1.2 Paper tracing.

Tracing paper for dimensioned drawings shall be in accordance with UU–P–561, Type as specified. 101.16.1.3 Film. Diazotype. Copies on sensitized, diazotype film shall be in accordance with L- F-340, Type and Class as specified. 101016.1.4 Paper, Diazotype. Copies on direct-positive, sensitized (diazotype) paper shall be in accordance with UU–P–221. 100-5 Supersedes page 100-5 of 30 March 1992