Department of Defense MIL-STD-1311D — MIL-STD-1311D Test Methods for Electron Tubes — DoD Standard Manual PDF

Downloaded from https://www.everyspec.com MIL-STD-1311D DIELECTRIC MATERIAL STRAIN METHOD 4101A (Gas switching tubes) 1. Purpose. The purpose of this test is to determine whether the tube will withstand the thermal shock of the test without breakage or loss of vacuum. 2. Equipment. The volume of water shall be great enough to be unappreciably affected in temperature by this test. 3. Procedure. The rf window sections of the tube shall be immersed in water at not less than 97 ° C for 15 seconds and immediately thereafter immersed in water at not more than 5 ° C for 5 seconds. In the case of tubes with more than one rf window, each section may be tested separately.

After this test, the following requirements shall be met: a. TR tubes: Ignitor voltage drop test (method 4406), or recovery time (method 4471), as specified. b. ATR tubes: Firing-time test (method 4486). c. Pre-TR tubes: Arc loss test (method 4488). METHOD 4101A 4101-1 25 March 1970