Downloaded from https://www.everyspec.com MIL-STD-1311D BEAM CONVERSION EFFICIENCY METHOD 4221 (Microwave - O-type devices) 1. Purpose. To measure the beam conversion efficiency of O-type devices with or without depressed collector. 2. Definition. The beam conversion efficiency of a microwave O-type device is defined as follows: Beam conversion efficiency = ( )( ) [ ] ( )( ) [ ] ( )( ) [ ] Ibn Ebn Ib Eb Ib Eb P o + + 2 2 1 1 Where: Ebn and Ibn are the nth electrode voltage and current (includes all electrodes, grids, anodes, body, helix, collector, etc.) where all voltages are referenced to the cathode. 3. Procedure. 3.1 Use circuit in method 4250 for measurement of power output.
3.2 The tube is operated as specified in the TSS to obtain measurements for calculation of beam conversion efficiency. 3.3 The beam conversion efficiency shall be within the limit as specified in the TSS. 4. Precautions. 4.1 Beam conversion efficiency as defined here is valid for saturated or unsaturated power levels. 4.2 Beam conversion efficiency as defined here is not to be confused with total efficiency which would take into account additional input powers such as rf drive power, heater power, etc., but excluding solenoid power. METHOD 4221 4221-1 13 September 1972