Downloaded from https://www.everyspec.com MIL-STD-1311D ION PUMPS When an ion pump is an integral portion of the tube, serving either as a vacuum pumping device or as a sensitive ion gauge and has a measurement specified on the TSS, the ion pump current shall be within the limit(s) specified. The power supply for an ion pump shall be a high impedance device, so only the power supply specified on the TSS or exact equivalent may be used. The test measurement shall be made at a point in time as specified on the TSS after application of all element potentials. METHOD 4268 METHOD 4268 4268-1 19 April 1968