Downloaded from https://www.everyspec.com MIL-STD-1311D 4. Precautions. a. To assure that stray light sources do not significantly affect luminance measurements, the light level recorded by the photometer in the measurement position shall be such that, with the TUT off, the photometer reading does not exceed 3 percent of the TUT luminance value to be measured. b. The individual lines of the written raster are readily discernable at large spacings but blend into a relatively uniform brightness as the spacing between written lines is decreased.
It is essential to determine the condition where the written lines first merge in the specified faceplate location(s), before measuring the raster height (h). Shrinking the raster beyond the first-merge condition may give a false indication of line separation and subsequently result in a second merge condition which will give an erroneous raster height measurement. 5. TSS requirements. In addition to the operating conditions for the TUT, the TSS shall specify the following: a. Area (see 3). b. Erase procedure (see 3c). c. Grid drive (see 3f). d. Scanning speed or the equivalent in terms of raster width and active line scan duration (see 2b and 3f). e.
Faceplate location(s) for luminance measurement (see 3f). METHOD 5415 5415-2 12 December 1972