Downloaded from https://www.everyspec.com MIL-STD-1311D 5. TSS requirements. a. In addition to the operating conditions for the TUT, the TSS shall specify the following: (1) Area to be examined. (2) Peak luminance level. b. If values other than those specified in this test method are required, the TSS shall specify: (1) Writing raster parameters. (2) Gray scale video test pattern parameters and limits. (3) Erase pulse width and frequency. (4) Whether viewing screen current is to be reduced or cut off during the erase period. (5) Minimum number of distinguishable luminance levels. METHOD 5419 5419-2 12 December 1972