Downloaded from https://www.everyspec.com MIL-STD-1311D 5. Precautions. a. This method requires that system or circuit noise amplitude be well below the amplitude of the target disturbance. Unless this condition is met, resulting in correlated noise appearing on the oscilloscope, this measurement cannot be made. b. Operating conditions for this test method, particularly reading beam current and scan size, shall be identical to those used in the determination of resolution (method 5410) or modulation transfer function (method 5422). Reading beam focus should be adjusted for optimum resolution at the measurement location(s). 6. TSS requirements. a.
In addition to the operating conditions for the TUT, the TSS shall specify the following for this test: (1) Field and line rates for TV raster. (2) Location of external focus and deflection components. (3) Area(s) of target in which dynamic range is to be determined. (4) Erase procedure. METHOD 5424 5424-3 12 December 1972