Downloaded from https://www.everyspec.com MIL-STD-31000 the current design activity. Product data shall reflect the approved, tested and accepted configuration of the defined delivered item. This together with other TDP elements forms a Production Level TDP which will be used to support the product throughout its lifecycle. 5.7.3.4 Commercial drawings/models and associated lists. Commercial drawings/models and associated lists provide engineering and technical information in support of end products, or designated portions thereof, which are commercially developed items, commercial off-the-shelf items (COTS), or items not developed at Government expense.
These data and lists shall be in accordance with the commercial design documentation practices of the contractor or supplier of the item. 5.7.3.4.1 Design disclosure. The degree of design disclosure on commercial drawings/models and associated lists, whether full design disclosure or limited design disclosure, shall be as stated in the contract or purchase order. 5.7.3.4.2 Data rights. Rights in data for commercial drawings/models and associated list shall be as stated in the contract or purchase order. 5.7.3.5 Special Inspection Equipment (SIE) drawings/models and associated lists.
SIE drawings/models and associated lists shall be prepared to provide the data required to manufacture or assemble SIE, which is mandatory to successfully produce the item. The SIE shall be defined in detail to the extent necessary for a competent manufacturer to manufacture or assemble SIE, which duplicates the performance characteristics of the original SIE. SIE is also known as special test equipment. 5.7.3.6 Special Tooling (ST) drawings/models and associated lists. Special tooling drawings/models and associated lists shall be prepared to provide the data required to manufacture special tooling which is mandatory to successfully produce the item.
The special tooling shall be defined in detail to the extent necessary for a competent manufacturer to produce tooling which duplicates the performance characteristics of the original tooling. 5.7.3.7 Specifications. Specifications shall be prepared as performance specifications or detail specifications as required in the contract or purchase order. 5.7.3.7.1 Defense specifications. Defense specifications shall be prepared in accordance with MIL-STD-961 as coordinated, limited or interim specifications. 5.7.3.7.2 Program-unique specifications. Program-unique specifications shall be prepared in accordance with MIL-STD-961 as item, material, process, software, item or system specifications.
5.7.3.7.3 Commercial Item Descriptions (CIDs). CIDs shall be prepared in accordance with the Federal Standardization Manual to describe, by functional, performance, or essential physical requirements, available commercial products or services. 5.7.3.8 Software documentation. Documentation for software imbedded in the hardware defined in the TDP or special inspection equipment related to the hardware shall be prepared in accordance with ISO/IEC 12207. 5.7.3.9 Special Packaging Instructions (SPI) drawings/models and associated lists. Packaging requirements and data shall be as specified in the contract or order. Special packaging 13