Downloaded from https://www.everyspec.com MIL-STD-31000 requirements, quality assurance provisions, software documentation and packaging details. 3.1.38 Technical data package document. A document that is part of a TDP element. 3.1.39 Technical data package element. A data product that is an actual component of the TDP. A TDP element provides all or part of the information necessary to define the item being documented by the TDP. 3.1.40 Technical data package data management product. A data product that is used to monitor and control the development and maintenance of the TDP. A TDP data management product contains information about the TDP rather than the item being documented.
3.1.41 Verification. All examinations, tests and inspections necessary to verify that an item meets the physical and functional requirements for which it was designed, to verify that a component, part or subassembly will perform satisfactorily in its intended application, or that an item conforms to specified requirements. 4. GENERAL REQUIREMENTS 4.1 General. This section covers general requirements for Technical Data Packages. 4.2 TDP levels. TDP levels provide for a natural progression of a design from its inception to production.
A particular TDP Level may be ordered to define a conceptual design, a developmental prototype or limited production design, or the highest type of engineering drawing/model required for quantity production of the item or system by the original developer or any other capable producer. TDPs shall consist of one of three Levels: (1) Conceptual Level (2) Developmental Level (3) Production Level 4.3 TDP types. TDP Types describe the form and format of the technical data and shall consist of one or more of the following types: 4.3.1 Type 2D: 2-Dimensional (2D) Technical Data Package 4.3.2 Type 3D: 3-Dimensional (3D) Technical Data Package. Type 3D comes in one of the following type subsets: a.
3D models only b. 3D models with associated 2D drawings 4.4 TDP elements. TDP Elements describe the various component parts of the TDP. a. Conceptual design drawings/models. b. Developmental design drawings/models and associated lists. c. Product drawings/models and associated lists. 8