Downloaded from https://www.everyspec.com MIL-STD-81OC Plot the sinusoidal spectrum. 7.2.4 Determination of dBr, dBH and dByr,(High frequency random). Following the steps detailed in 6.1 for the high frequency random curve and making use of figure .519.2-11 to obtain fo. = 920 Hz the following table is constructed. High Frequency Random G& = 33.43 g2/Hz Gr = 920 HZ f/f , 0 f (re.
G:=) (re.d~~ Max) + d% = dBy g2/Hz r _ 0.7 644 -14.3 0.0 -12.2 -12.2 .075 0.89 818 -17.0 -2.7 -12.0 -14.7 .042 1.0 920 -18.S -4.2 -12.3 -16.5 .028 1.11 1021 -20.6 -6.3 -12.1 -18.4 .019 1.39 1279 -24.5 -10.2 -12.4 -22.6 .007 , 1.78 1638 -29.1 -14.8 -12.7 -27.5 .002 2.22 2042 -33.6 -19.3 -13.2 -32.5 .001 Again, note that Gr Max from G& or G= ~ax = (.03715) referenced to Gr ~ax and represents altimeter. The final right hand spectrum in units of g2/Hz. The high frequency spectrum may now be”plotted. is -14.3 dB down In tu~, dByr is (33.43) = 1.241 g2/Hz. the high frequency test column is the vibration spectnsm for the 7.2.5 Determination of dBr, d% and dBy (Low frequency random).
Repeating the past procedures of 7.1 and noting from 3.3.4.2 that f. =.300”Hz the following table is constructed. METHOD 519.2 519.2-24