"base": { "stream": "yang-push", "encoding": "encode-kvgpb", "source-vrf": "", "no-synch-on-start-v2": false, "xpath": "/iosxe-oper:ios-oper-db/hwidb-table" }, "type": "sub-type-static", "state": "sub-state-valid", "comments": "", "updates-in": "0", "updates-dampened": "0", "updates-dropped": "0", "mdt-receivers": [ { "address": "5.28.35.35", "port": 57555, "protocol": "grpc-tcp", "state": "rcvr-state-connecting", "comments": "Connection retries in progress", "profile": "" } ] } ] } Configuring Named Protocol Receiver Using the CLI SUMMARY STEPS 1. enable 2. configure terminal 3. telemetry receiver protocol receiver-name 4.
protocol { cloud-native | cntp-tcp | cntp-tls profile profile-name | grpc-tcp | grpc-tls profile profile-name | native | tls-native profile profile-name } 5. host { ip ip-address | name hostname } receiver-port 6. end DETAILED STEPS Procedure Model-Driven Telemetry Configuring Named Protocol Receiver Using the CLI Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Model-Driven Telemetry 48