Subscription Configuration Using Named Receivers Using CLI SUMMARY STEPS 1. enable 2. configure terminal 3. telemetry ietf subscription id 4. receiver-type protocol 5. receiver name name 6. end DETAILED STEPS Procedure Model-Driven Telemetry Subscription Configuration Using Named Receivers Using CLI Command or Action Purpose Step 3 telemetry receiver protocol receiver-name Example: Device(config)# telemetry receiver protocol receiver1 Configures a named protocol receiver, and enters telemetry protocol-receiver configuration mode.
Step 4 protocol {cloud-native | cntp-tcp | cntp-tls profile profile-name | grpc-tcp | grpc-tls profile profile-name | native | tls-native profile profile-name} Example: Device(config-mdt-protocol-receiver)# protocol grpc-tcp Configures a protocol for the named protocol receiver connection. Step 5 host {ip ip-address | name hostname} receiver-port Example: Device(config-mdt-protocol-receiver)# host name rcvr.test.com 45000 Configures the name protocol receiver hostname. Step 6 end Example: Device(config-mdt-protocol-receiver)# end Exits telemetry protocol-receiver configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example:
Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Model-Driven Telemetry 49