Multifunction accessory The multifunction accessory is suitable for cutting and shredding food. en Place lid on the bowl and turn all the way anti-clockwise. If there are larger quantities of ingredients in the bowl, it may take a little more effort to attach the lid. If required, turn the three- winged coupling on the underside of the lid into the correct position. Place the base unit on the attachment and lock into position. Insert pusher. Insert the mains plug. Hold the base unit and universal cutter firmly and switch on the appliance (turbo speed). To add more ingredients, release the On button. Wait until the tool comes to a standstill.
Remove the pusher and add ingredients through the feed tube. Release the On button after processing. After using the appliance: Remove mains plug. Press the release buttons and remove the base unit from the attachment. Turn lid clockwise and remove from the bowl. Take hold of the universal blade by the plastic handle and take out. Carrier disc with disc inserts Risk of injury from sharp blades/ rotating drive! While the appliance is operating, never place fingers in the mixing bowl. Always use the pusher for adding ingredients. After switching off, the drive continues running for a short time. Change tools only when the drive is at a standstill.
When working with the multifunction accessory, the base unit may be switched on only when the lid has been attached and screwed on tight. Warning! Multifunction accessory must be completely assembled before use! Caution! Before cutting meat, remove gristle, bones and sinews. The multifunction accessory is not suitable for cutting very hard food (coffee beans, radishes, nutmeg) and frozen food (fruit, etc.). Universal blade For cutting meat, hard cheese, onions, herbs, garlic, fruit, vegetables, nuts, almonds Always observe the maximum quantities and processing times in the table (Fig. = ). Slicing attachment – coarse Set speed control to low speed for cutting: cucumbers, carrots, potatoes.
Slicing attachment – fine Set speed control to low speed for cutting: cucumbers, carrots, beetroot, zucchini. Shredding insert – medium Set speed control to high speed for shredding: apples, carrots, cheese, cabbage. Grating disc insert – coarse Set speed control to high speed for grating: potatoes for dumplings, potato pancakes; fruit and vegetables for raw vegetable salad. Always observe the maximum quantities and processing times in the table (Fig. = ). The blade is sharp and can cause injury! Never grip the blades of the universal blade. Take hold of the universal blade by the plastic handle only. Do not touch blade with bare hands. Clean them with a brush. Fig.
Place bowl on a smooth and clean work surface. Insert universal blade. Add food. Warning! Universal blade must be upright in the bowl so that the lid fits correctly (Fig. = -3). 14 Robert Bosch Hausgerдte GmbH