en Basic operation Fitting continuous feed shredder onto the base unit Setting Use 3-4 (2-3) Shred food coarsely or finely us- ing the reversible shredding disc, e.g. fruit or vegetables. WARNING Risk of injury! Improper use may cause injuries. ▶ Only attach and remove accessor- ies once the drive has stopped and the appliance has been un- plugged. Processing food with the con- tinuous feed shredder WARNING Risk of injury! Ў Rotating drives, tools or accessory parts may cause injury. ▶ Do not reach into the filling shaft. ▶ Only use the pusher to push down ingredients. Ў Improper use may cause injuries. 1. Place the continuous feed shred- der on drive 2 as shown. → Fig. 13 2.
Push the continuous feed shredder down and rotate clockwise until it engages. → Fig. 14 The continuous feed shredder must be securely connected to the base unit. ▶ Only use the accessories once fully assembled. ▶ The accessories should only be used in the intended operating position. Basic operation Basic operation Note: The continuous feed shredder can only be used if the bowl is fitted properly. Tip: For optimum results, process thin ingredients in bunches. You can find out everything you need to know about operating your ac- cessory here. Recommended speeds 1. Prepare your food. Cut large items of food into pieces so they fit into the filling shaft. 2. Insert the mains plug. 3.
Set the rotary switch to the recom- mended speed. → Fig. 15 4. Insert the food into the filling shaft and press down with the pusher, applying light pressure. → Fig. 16 5. Stop processing if Observe the recommended speeds for optimum results. Note: Your model is equipped with a 4- or 7-level rotary switch depending on the features of the appliance. The recommended speeds for the 4-level rotary switch are always shown in brackets in these instructions for use. Setting Use 7 (4) Slicing, shredding or grating food. Ў Reversible slicing disc Ў Grating disc, medium-fine Ў Potato fritter disc Ў Asian vegetable disc ‒ all food has been processed.
‒ the food in the bowl almost reaches the outlet opening of the continuous shredder. 6. Set the rotary switch to . 20