omron — 2-3-1 Connecting by RS-232C

2 Installing the NB Unit and Connecting Peripheral Devices 2-3 Connecting of NB-series with PC In order to transmit the screen data established by the NB-Designer to the NB Unit, the NB Unit needs to be connected to a PC with a RS-232C, USB or Ethernet cable. 2-3-1 Connecting by RS-232C Take NB5Q/NB7W-TW01B as example: Connect the RS-232C cable at the PC side to the serial port COM1 of the NB Unit.  Communication conditions Select the downloader mode through the tool menu of the NB-Designer. For details, refer to 3-15 Download in the NB-Designer Operation Manual .  Communication cable Users can make connection cables by themselves.

For details, refer to A-4 Fabrication of the Connection Cable in the NB Series Setup Manual . 2-8 NB-series Programmable Terminals Setup Manual(V107)