2 Installing the NB Unit and Connecting Peripheral Devices 2-5-6 Parameter Settings at Host Side (Sysmac Studio) Because the port number of NB is dynamic, the user doesn’t need to set it during the communications through the OMRON CJ/CS/NJ Series or NX1 Series Ethernet UDP driver. But user needs to set the UDP parameters of the NJ/NX-series controller in the Sysmac Studio referring to the following limitations. Take the settings in the Sysmac Studio as example: [TCP/IP] settings dialog [FINS settings] dialog 2-44 NB-series Programmable Terminals Setup Manual(V107)