omron — A-4-1 Cable Processing

Appendices A-4 Fabrication of the Connection Cable Fabricate the connection cable following the procedures below. A-4-1 Cable Processing 1 Cut the cable to the required length. A-4 Fabrication of the Connection Cable A-4-1 Cable Processing 2 Use a tool like a razor, etc. to cut off the ethylene peel of the cable. Be care not to damage the shielding layer (for grouping purpose) 3 Use a pair of scissors to snip off the shielding layer. 4 Bring out the core of each wire using a wire stripper. 5 Fold back the shielding layer. 6 Wrap the folded part of the shielding layer with aluminum foil tape.

1) 2) 40 (RS-232C) 25 (RS-422A/RS485) 3) 10 4) 5 5) 6) Aluminum foil tape (Unit mm) NB-series Programmable Terminals Setup Manual(V107) A-9 App