No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 4 Tools - Interchangeable Tooling, Rear Toolposts, Long Cross Slides 13 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 78175 Myford interchangeable tooling set comprising: toolpost, two standard toolholders, one vee (boring bar) holder, one parting off toolholder, parting off blade, hexagon socket wrench and tee handled hexagon key 123.90 145.60 Separate items from set:
78175A Toolpost 72.00 84.60 78175B Standard toolholder 18.75 22.03 78175C Vee (boring bar) holder 20.35 23.91 78175D Parting off toolholder 25.56 30.03 78175E Parting off blade 6.15 7.22 78175F Hexagon socket wrench 3.20 3.76 Note: For Series 10 lathe use 6.35mm (1/4) tool bits. For Series 7 lathe use 10mm (3/8) tool bits. For 254 Plus lathe use 12mm (1/2) tool bits. 20/199 Rear toolpost accepts tools having shanks up to 12mm (1/2) square. Tools are inverted so that lathe runs in normal direction.
When mounted in rear slot on cross slide, distance between inner face and rear face of top slide is 95mm (33/4) 44.31 52.06 95/170 Rear toolpost accepts tools having shanks up to 12mm (1/2) square. Tools are inverted so that lathe runs in normal direction. When mounted in rear slot on cross slide, distance between inner face and rear face of top slide is 120.6mm (43/4). For 254 Plus models from serial number ZS164451.
52.40 61.57 20/196 Long cross slide is 39.7mm (19/16) longer than standard and has an extra tee slot, leaving ample space between tools when rear toolpost is in use, with 11835 extra long imperial feedscrew, which increases the length of travel of the long cross slide for milling etc to 150mm (6) for machines prior to VS166941.
71.44 83.94 20198 As 20/196, but with 11836 metric feedscrew 71.44 83.94 20/209 Long cross slide is 41mm (15/8) longer than standard and has an extra tee slot, leaving ample space between tools when rear toolpost is in use, with A3239 extra long imperial feedscrew, which increases the length of travel of the long cross slide for milling etc to 178mm (7) for all ML7 lathes and ML7-R lathes prior to KR161479. 92.31 108.46 20/210 As 20/209, but with A7822 metric feedscrew 92.31 108.46 20/209 and 20/210 both for ML7/ML7-R only; Super 7 has long cross slide as standard.