No. 600 Prices Pounds Sterling Carriage Extra Issued December 2002 Section 2 Centres / Drill Pads / Reducing Sleeve / Dieholders 8 Series 10 Series 7 254 Part No. Description Price Excl. VAT £ Price Incl. VAT £ 78109 Rotating centre - 2 M.T. 44.22 51.95 78127 Rotating centre - 2 M.T. - precision, compact design, West German made 51.94 61.02 78056 Rotating centre - GEPY 2 M.T., high precision, compact design, Swiss made 96.94 113.90 70/1248 Hard centre for tailstock - 2 M.T. 8.80 10.34 70/1249 Soft centre for headstock - 2 M.T. 6.39 7.50 11411 Square centre - 2 M.T. 18.27 21.46 11412 Half centre - 2 M.T.
16.17 18.99 11413/1 Hollow centre - 2 M.T. (Recommended for use with drill pads 11415 and 11416) 10.67 12.53 A1861 Wood prong centre - 2 M.T. 14.68 17.24 11414 Fluted centre - 2 M.T. 25.46 29.91 11415 Drill pad - plain 7.51 8.82 11416 Drill pad - vee 10.49 12.32 Above drill pads require stub arbor - use hollow centre 11413/1 12222 Reducing sleeve, No. 4 M.T./No. 2 M.T. 23.07 27.10 Tailstock dieholders for button dies with No. 2 M.T. shanks having a sliding head and a pin to prevent rotation. The tailstock barrel may be set so that the head is withdrawn from the pin and rotates the workpiece at the end of the cut.
This unit is supplied in two pieces; the arbor assembly and a choice of four dieholders. 33/045 Tailstock arbor assembly 10.47 12.30 33/046 Dieholder for 13/16 dies 12.50 14.68 33/047 Dieholder for 1 dies 12.50 14.68 33/048 Dieholder for 20mm dies 12.50 14.68 33/049 Dieholder for 25mm dies 12.50 14.68