beckhoff TwinCAT 2 — 2 Overview

Overview Slave axes Axes whose set values (position, velocity, acceleration) are generated in functional dependency on the set values of other axes (master axes, virtual axes, slave axes, simulation axes) - in particular on their position setpoints - are called slave axes. Apart from the coupling and uncoupling, these axes do not generally have any functionality of their own (in particular they do not have start or stop functions) and operate under linear path control in synchronization with the master axis. The master axis can itself be a slave axis. When a master axis (which is to become a slave axis) is coupled to another master axis, the slave axis retains its own position control.

FIFO The TwinCAT NC FIFO group provides the facility of supplying externally generated setpoints to a group of axes via the NC, and thus of driving them synchronously. The position setpoints of the axes corresponding to a fixed, although selectable, time period (the FIFO cycle time) are present in the form of a FIFO which is kept topped up by the PLC. The FIFO allows the position of a group of axes to be handled synchronously with reference to time. The FIFO contains a fixed number of specified interpolation points between which the NC position is interpolated and from which the velocity is determined.

The axis positions of the FIFO are either read out from a large table calculated off-line in the PLC or generated by a function in the PLC and permanently passed on to the FIFO of the NC by a PLC program in the PLC cycle. NCI TwinCAT NC I is the function group for controlling specified synchronized axis movements in three dimensions, according to the conventions of DIN 66025 and various extensions. It consists of interpreter/ PLC function blocks, set preparation task, look ahead, set execution task, cyclic channel interface and cyclic axis interface. On-line access is possible to all levels (interpreter stop, programmed halt, override). See: TwinCAT NCI documentation .

Numerical Control (NC) Basics 9 Version: 1.2