Setting Up the OmniBook Configuring the OmniBook System Devices Menu (continued) Default Security Menu Default 2-8 Audio Sets how the audio system is configured: by the BIOS (specified or automatic) or by a PnP operating system. Enabled SB I/O address* Sets the Sound Blaster I/O address. 220h WSS I/O address* Sets the Windows Sound System I/O address. 530h AdLib I/O address* Sets the AdLib synthesizer I/O address. 388h Interrupt* Sets the interrupt. IRQ5 1st DMA channel* Sets the DMA channel for playback. DMA1 2nd DMA channel* Sets the DMA channel for recording. DMA0 MPU Device Sets how the MIDI capability is configured: by the BIOS (specified or automatic) or by a PnP operating system.
The port replicator provides a MIDI port, but not the OmniBook. Disabled MPU I/O address* Sets the MIDI I/O address. 330h Interrupt* Sets the interrupt. IRQ9 System Password is Shows whether a password is set. Clear Set System Password Press ENTER to set, change, or clear the password and save all Setup changes. (Up to 8 alphanumeric keys, prefix keys ignored.) Password on Boot Sets whether the password is required to boot. Disabled Password on Resume* Sets whether the password is required to continue after Suspend and Hibernate. Disabled