Setting Up the OmniBook Configuring the OmniBook Power Menu Default 2-9 Power Management Mode Disables time-outs, selects a combination of time-outs, or allows customized time-outs. Max Power Savings Smart CPU Mode Enables automatic CPU power savings. Absence of keyboard, mouse, and hard disk activity could cause slower CPU response. On Standby Time-out Sets the period of inactivity after which the computer goes from On to Standby power mode. 2min Suspend Time-out Sets the period of inactivity after which the computer goes from Standby to Suspend power mode.
(Skips Standby mode if that time- out is disabled.) 4min Hibernate after 4 hours Sets whether the computer goes from Suspend to Hibernate power mode after the indicated period of inactivity. (Skips Suspend mode if that time-out is disabled.) Enabled Hard Disk Time-out Sets the period of hard disk inactivity after which the hard disk stops spinning. 30sec Time-out on AC Sets whether power management time-outs occur while the ac adapter is connected. Disabled Power Button Mode Sets the action of the blue power button when pressed for less than 4 seconds. Suspend Resume on Modem Ring Sets whether the system resumes from Suspend if a ring signal is received.
Enabled Resume on Time of Day Sets whether the system resumes from Suspend at a defined time of day. Disabled Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled.