HP — OmniBook 3000 User's Handbook

If the OmniBook turns off immediately after it turns on • Battery power is probably extremely low. Plug in the ac adapter or insert a secondary battery. If the OmniBook doesn’t suspend automatically • If you have a connection to another computer, the OmniBook doesn’t suspend if the connection is actively in use. • Check the time-out settings in the BIOS Setup utility. • If you have a CD-ROM drive connected, use Device Manager to view the CD- ROM drive properties. If the auto-detect setting is active, it prevents the OmniBook from automatically suspending after a period of inactivity while the CD-ROM drive is present. If the OmniBook doesn’t turn on • Connect the ac adapter.

• Press the blue power button to try turning on the unit. • Try adjusting the display. • Reset the OmniBook. If you get no response, remove the battery and ac adapter and press the system- off button again—then install the battery or plug in the ac adapter and try resetting again. If the OmniBook doesn’t turn on with a fresh battery • If the new battery is low, plug in the ac adapter. If the OmniBook doesn’t suspend immediately • If the OmniBook is performing an operation, it normally waits for the operation to finish. If the battery doesn’t charge or stops charging • Check that the battery is fully installed and locked in place.

• Turn off the OmniBook, then check that the battery contacts are clean and that the ac adapter cables are fully plugged in. • Move the OmniBook away from any nearby heat source. Unplug the ac adapter and allow the battery to cool down. An elevated battery temperature prevents charging. If your OmniBook password doesn’t work • To restore operation if you forget your password, you might need to return your OmniBook computer to Hewlett-Packard for repair. You will also need your proof-of-purchase. Call Hewlett-Packard at the number in the Support and Service booklet or in OmniBook Support in the online OmniBook Library. Lockup Problems 52