• Turn down the display brightness (Fn+F1). • Heavy modem use can affect battery operating time. • Check the Power Management settings in the BIOS Setup utility. 1. From the Start menu, shut down, then restart the OmniBook. 2. When you see the HP logo, press F2 to enter the BIOS Setup utility. 3. From the Power menu, make sure the Power Management Mode is set to Max. Power Savings. 4. Press F10 to Save and Exit the BIOS Setup utility. If the battery doesn’t charge • Make sure the ac adapter is plugged into the power source. • Check that the light on the ac adapter is on. • Check that the battery is fully installed and locked in place.
• Turn off the OmniBook, then check that the battery contacts are clean and that the ac adapter cables are fully plugged in. • Move the OmniBook away from any nearby heat source. Unplug the ac adapter and allow the battery to cool down. An elevated battery temperature prevents charging. • If available, try another battery and ac adapter. If a second battery doesn’t charge • A second battery doesn’t charge until the main battery is fully charged. • Make sure the ac adapter is plugged into the power source. • Check that a second battery module is fully installed and locked in place. • Check that the light on the ac adapter is on.
If the OmniBook stops responding • Press CTRL+ALT+DEL to end the application that is not responding. • Press the blue power button to suspend the OmniBook. Then press the power button again to turn the OmniBook back on. • If nothing happens, reset the OmniBook. If the OmniBook doesn’t suspend as expected • If you have a connection to another computer, the OmniBook doesn’t suspend if the connection is actively in use. • If the OmniBook is performing an operation, it normally waits for the operation to finish. Printing Problems Hint 43