Introduction You can do this on most Windows Embedded Compact devices by creating a link to it in \Windows\Startup . If this does not work on your device, please refer to the manufacturer's documentation. d) Run Remote Agent. The Remote Agent window is displayed. 3. Configure the communication settings in Remote Agent: a) Click Setup . The Setup dialog box is displayed. b) Select the appropriate connection type: Serial Port or TCP/IP . If you select Serial Port , also select the COM port and review the advanced settings. If you are already connected to the target device via ActiveSync, you do not need to select another connection at this time.
However, keep in mind how the target device will actually be used during project run time. c) Click OK . d) If you selected TCP/IP for the device connection, note the IP address. Page 24