Orion-Tr Smart DC-DC Charger Non-Isolated 7. Troubleshooting & Support Consult this chapter in case of unexpected behaviour or if you suspect a product fault. The correct troubleshooting and support process is to first consult the common issues as described in this chapter. If you experience problems with VictronConnect, first consult the VictronConnect manual , especially the troubleshooting chapter. Should these fail to resolve the issue, scan through popular questions and answers regarding your product and ask the community of experts in the Victron Community In case the problem persists, contact the point of purchase for technical support.
If the point of purchase is unknown, refer to the Victron Energy Support webpage . 7.1. The is not operational Once powered up and operational, the controller LED(s) will illuminate or flash and can communicate with VictronConnect via Bluetooth. Once the charger is powered up, VictronConnect can be used to: 1. Check the charger status 2. Check for error messages 3. Update firmware 4. Make or change settings If the unit does not power up, use this chapter to check the possible reasons why the charger is not operational. 7.1.1. Visual check Before carrying out any electrical checks, visually inspect the charger for damage. 1. Check for mechanical damage and burn marks.
Note that this kind of damage is usually not covered by warranty. 2. Are the connecting wires making contact with the plug/terminals? 3. Are the wires stripped to the correct length and tightened with the correct torque? See Recommended torque [6] . 4. Inspect the battery terminals. If there are burn marks on the terminals or if the cables or connectors are molten, this damage is usually not covered by warranty. Page 15 Troubleshooting & Support