7 ． EtherNet/IP Connection Procedure 7.4. EtherNet/IP Communication Status Check Confirm that the EtherNet/IP tag data links are operated normally. 7.4.1. Checking the Connection Status Check the connection status of the EtherNet/IP network. 36 1 Check with LED indicators on Controller that the tag data links are operated normally. The LED indicators in normal status are as follows: NET RUN: Green lit NET ERR: Not lit LINK/ACT: Yellow flashing (Flashing while packets are being sent and received.) 2 Check the LED indicators on Robot. The LED indicators in normal status ○ are as follows: “Z”BRAKE RELEASE STATUS:
OK (high power disabled) OK ON (high power enabled) STATUS EF(ePLC connect start up error) *For information on how to release the error “EF”, refer to the Machine Automation Controller NJ-series Startup Guide Adept Robot Control Library (Cat. No. P103-E). 3 Select the EtherNet/IP Device List Tab. 4 Right-click Built-in EtherNet/IP Port Settings and select Monitor from the menu.