Recording Selecting the Auto Focus Mode This allows the focusing method that suits the positions and number of the subjects to be selected. 1 Press [ ]. 2 Press 2 / 1 [MENU/SET]. Applicable modes: and eyes. [Metering Mode] is set to [ ]) Up to 15 faces can be detected. Eyes that can be detected are only those of the face that is in focus. You can change the eye to be in focus. (P38) Position and size of the AF area can be changed. (P38) ([Face/Eye Detection]) The camera focuses on the subject you specify. The exposure will be optimized for the subject. (When [Metering Mode] is set to [ ].) Focus and exposure will keep on following the subject even if it moves.
(Dynamic tracking) (P38) ([Tracking]) Up to 49 AF areas can be focused. This is effective when a subject is not in the center of the screen. You can select areas to be in focus. (P39) ([49-Area]) From among 49 AF areas, you can freely set the optimum shape of the AF area for the subject. Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes more detailed information. , etc ([Custom Multi]) The camera focuses on the subject in the AF area on the center of the screen. Position and size of the AF area can be changed. (P38) ([1-Area]) You can achieve a more precise focus on a point that is smaller than [ Ш ].
If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. The focus position can be set on an enlarged screen. Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes more detailed information. ([Pinpoint]) (ENG) VQT5H68 37 Mode and then press Fn3 utomatically detects the person’s face to the camera will be in focus, while will be optimized for the face. (When