Recording Changing the eye to be in focus Touch the eye to be in focus. Touch the eye in the yellow frame. If you touch any other location, the AF area setting screen will be displayed. (P38) If you touch [ ] or press [MENU/SET], the eye focus setting will be canceled. Locking the subject to be tracked ( [Tracking]) Aim the AF tracking frame over the subject, and press the shutter button halfway. A AF tracking frame AF area will turn green when the camera detects the subject. The AF area turns yellow when the shutter button is released. Lock is canceled when [MENU/SET] is pressed. Setting up position of the AF area/changing size of the AF area A Applicable modes:
When [ š ], [ ], [ Ш ], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describes more detailed information. When selecting [ š ], [ Ш ] Position and size of the AF area can be changed. 1 Press [ ]. 2 Select [ š ] or [ Ш ] and press 4 . AF area setting screen is displayed. You can also display the AF area setting screen by touching the screen. 3 Change the position and size of the AF area. If you set the AF area over an eye in the yellow frame when [ š ] is selected, the eye to be in focus will be changed.
(P38) 38 VQT5H68 (ENG) Button operation Touch operation Description of operation 3/4/2/1 Touching Moves the AF area. Pinching in/ out Enlarges/reduces the AF area in small steps. / s Enlarges/reduces the AF area in large steps. [DISP.] [Reset] Resets the AF area back to the center. • If you press the button again, the frame size will be reset to the default setting.