BYD Han — High Beam Assist (HMA)

104 3-4 Switches Tip When HMA is activated, the high beam assist indicator light on the instrument panel will light up. Deactivating HMA HMA can be deactivated in any of the following ways: Rotate the light switch knob to any position except ; → DiPilot → Driving Assist or slide down the shortcut menu to turn off HMA. Tap Turn on the high beam manually. System suppression conditions The intelligent high & low beam system is suppressed in any of the following situations: The vehicle speed is below 35 km/h; The fog lights or turn signals are turned on, or the vehicle makes a sharp turn.

System limitations The intelligent high & low beam system may be unexpectedly activated or fails to activate in any of the following situations. In such cases, the driver is advised to control the lights manually: There are traffic participants with poor lighting (such as pedestrians and bicycles), railways or waterways nearby, or wild animals on the road. The front windshield is dirty, covered in mist, or blocked by stickers or decorations. There are strongly reflective objects around, such as traffic signs on highways, water reflection on the road surface, etc.

Note When the vehicle collision or sensors have been reinstalled, contact a BYD authorized dealer or service provider to calibrate the sensors, so as to avoid affecting system performance.