3-4 Switches 105 Wiper Switch Front Windshield Wipers and Washer The lever is used to control the windshield wipers and washer. The lever has five modes: : High-speed : Low-speed : Automatic/Intermittent : Stop 3 : Point-wiping Controller Operation To select a mode, push up or pull down the lever. At low- and high- speed modes, the wiper operates continuously. " position. The wipers wipe at a low speed until you release the lever.
To let wipers work in the spot-wiping mode " ", pull the lever from the " Automatic/Intermittent The rain sensor automatically controls the operation mode of wipers based on the rainfall, and it is located in front of the interior rearview mirror on the front windshield inside the vehicle. To use the automatic wiper function, turn the wiper switch to the automatic mode, and toggle "Automatic Wiper" on in (infotainment system) → Vehicle Settings → Greeting. To use the intermittent wiper function, turn the wiper switch to the automatic mode, and toggle "Automatic Wiper" off in (infotainment system) → Vehicle Settings → Greeting.