140 4-1 Charging/Discharging Instructions Tip This function will be limited when the vehicle is using external discharge or when power is low. When ignition status is OFF and VTOL is connected without output for a long time, the vehicle's static power consumption increases. It is recommended that the discharging/charging connectors are removed when the device is not in use. Note For precautions on the use of discharge connection devices, refer to article 3 of charging precautions, charging precautions for charging equipment. Before discharging, confirm the vehicle's power and estimate the remaining driving range. Before VTOL discharging, ensure that the load is turned off.
Warning in-car discharge socket, or the metal end of the vehicle's charge port. When discharging, do not touch the discharge power strip, If or smell, stop it immediately. anything unusual is noticed during discharge, such as smoke safety warnings (refer to charging instructions). Discharging safety warnings are the same as charging Store the product in a cool dry place when not in use. When the front of the car or near the tires. discharging, do not place the device in the trunk, under When using it, avoid it getting rolled over by the vehicle, dropped, or trampled on. Never its cable. When moving the device, it needs to be handled with care. drop the device.
Never move it by pulling it directly by