BYD Han — External Discharging Method*

4-1 Charging/Discharging Instructions 141 Warning Never use the discharging equipment if the power supply strip cable becomes soft, the discharging nozzle cable is worn out, the insulation layer is cracked, or in case of any other damage. Never use the equipment when the discharging connector or power supply strip is disconnected, broken, or there is any sign of surface damage. External Discharging Method* Discharging Before discharging, turn off the anti-theft mode of the vehicle. Unlock the charge port hatch switch, then open the port hatch and the port cap. Check before discharging: 4 Ensure that the battery capacity of the vehicle to be discharged is not below 15%.

Using and Driving Ensure that VTOL connection device is free of abnormalities such as broken housing, rusted plug, or foreign materials. Ensure that there is no water or foreign material inside the charge port and that metal terminals are not damaged and free from rust or corrosion. Do not discharge if any of the above conditions is found; otherwise, short circuit or electric shock so caused could lead to personal injury. Connect the discharge connection device: Connect the VTOL discharge device to the charge port. The power strip indicator lights up when the strip is powered and ready for use. Discharging starts:

After the connection is made, discharge begins and respective information is displayed on the instrument cluster. Stopping discharging