4-4 Starting and Driving 163 Note safety, make sure that the vehicle is set to the "P" gear position or the EPB switch is pulled up before getting out of the vehicle. In the first few seconds after starting the vehicle, the EPB system is in the process of power-on self-test, during which it will not respond to all functions. Manual EPB Release When power status is on "OK" or the vehicle is started and the gearshift lever is not on "P” (Parking), press and hold the brake pedal and press the EPB switch until the indicator on the cluster goes off, indicating EPB has been released, and an "EPB Released" message is displayed.
Note 4 The "P" gear is the vehicle's parking gear, meaning that the vehicle is in a stable parking status, while EPB is the vehicle's main parking device. To ensure parking safety, release EPB with the EPB switch only when the vehicle is not in "P" gear (parking gear). Using and Driving Automatic EPB Release upon Vehicle Start With the vehicle parked, start the vehicle, depress and hold the brake pedal, and shift the gear from "P" or "N" into a driving gear like "D" or "R". EPB is released automatically, the indicator goes off, and a "EPB released" message is displayed. Note The brake pedal must always be pressed when shifting gears.
Release the pedal only after the intended gear is displayed on the cluster.